Home / News / The Right Bike For Your Bod
The Right Bike For Your Bod

The Right Bike For Your Bod

Along with offering you a better variety and professional recommendations, bike shop workers can help you get matched up to the best bike size. You can obtain the bike either way too big or too small, which will cause your satisfaction to suffer. Follow the tips below, and you'll have the ideal suitable for your mountain bike.

Standover Height

When you check the sizing on your own, the first thing you want to verify is the inseam clearance, or the standover height. When you come to a stop, you will want to have lots of area between you and the top tube. There needs to be around 4 to six inches of clearance from the top of your inseam to the top of the upper tube.

Feet & Leg Placement

There's an awesome formula for figuring out the leg position for using a mtb. When using a mtb, the surface constantly alters, raising you off the seat constantly, often just somewhat, other times completely off.

As a result, you'll have to position your seat somewhat lower than you normally would on You'll require to sit your seat somewhat lower than you would normally on any type of other type of bike. Make certain you take this somewhat shortened seat height position in to account when you factor the height of the frame.

Cycling Compartment

The next item you'll need to verify is the cyclist compartment layout (the distance between the seat and the handlebars). As soon as the correct leg extension has been figured out, be certain the handlebar is one to two inches below the top of the seat. You must never have the handlebars taller than the seat, unless there is some type of upper body issue.

Dual Suspension Bicycles

With suspension located at both ends, you'll prefer your weight much more in the center of the bike to ensure your weight is distributed uniformly between the front and back suspension systems, therefore allowing the front and back suspension to function as an unit.

This can be done very easily using either a bigger or shorter stem to increase the hand elevation, which will in turn move the upper body up and the weight towards the rear. The increase in height should not be any more than two inches, then the decrease in reach should not be any more than two inches.

Test Run

Go out and test ride the bike once you have taken all of these steps in to account. Make sure you use a helmet, even if you are going to be riding for a quick period of time. Make certain that the tires are set to the right pressure, and that the shop has adjusted the bike for you properly.

You must have a store staff member observe your body position and ride height while cycling, to establish if any type of additional adjustments need to be made. Ride the bike around awhile to get comfortable with its handling and new devices. Start off gradually, then give the bike a bit of time to present its individuality.

After a couple of moments, you might observe that something isn't really operating correctly or simply does not feel right in general. If this takes place, return to the shop and get the issue remedied long before you eliminate the bike.

The more you ride bikes, the less complicated it will be to see the difference in the ride types. Remember, it could take months as well as years to appreciate the way a bike handles. Talk with those who cycle, and ask if they ride the bikes they sell. Through this, you'll find out much more regarding the mountain bikes you like so much!